Coltar epoxy KE920

The amount of KE920 epoxy coltar, depending on the preparation of the work surface, is required to cover one square meter with a thickness of 100 microns, about 150 grams.

The surface under the work must be clean, firm and free from any grease, dust, paint, oil and loose particles. Epoxy Coltar KE920 is available in two packages, A and B. Always mix the two packages thoroughly. Continue mixing the ingredients for three minutes until a uniform and homogeneous mixture is obtained. Apply the prepared mixture with an airless or roller on the desired surface.

• The storage period is one year in the original packaging.
• The best storage temperature is +10 to +30 degrees Celsius.
• packing : A total of 30 kg of component A: 25 kg and part B: 5 kg

This substance is not in the range of harmful substances for the environment, and if it comes into contact with the eyes, you should see a doctor immediately. Be sure to use masks, gloves and appropriate safety equipment. This substance is flammable. It should be kept away from heat and direct flame.

• physical state : Viscosity liquid
• Color: Black
• Special Weight : g/cm 0/05 ± 1/32
• Composition ratio: A: 5 and component B: 1