Cold applied bituminous mastic MG695

The consumption amount of cold bituminous mastic of MG696 implementation can be calculated depending on the volume of the section and the specific weight of the mastic. Normally, about 2 kg is used for a width of 2 cm and a depth of 2 cm and a length of one meter.

All seams must be completely clean and free from contamination.
Put the mastic into the seams with a spatula or trowel with hand pressure, and you can use a spatula dipped in solvent to smooth the final surface. Heat the cold mastic in a water bath with indirect heat to a temperature of 60 to 80 so that the material becomes soft.

 

• The storage period is one year in the original packaging.
• The best storage temperature is +10 to +30 degrees Celsius.
• packing : 20 kg bucket

• This substance is not in the range of harmful substances for the environment, and if it comes into contact with the eyes, you should see a doctor immediately.
• Be sure to use masks, gloves and appropriate safety equipment.
• This substance is flammable. It should be kept away from heat and direct flame.

• physical state : doughy
• Color : Black
• Special Weight : g/cm 0/05 ± 1/35
• Solid amount: 80 percent
• Running time temperature: 10 to 40 degrees Celsius
• Thermal resistance: -20 to 70 degrees Celsius