VTH3010 anti-acid bonding mortar

The consumption of VTH3010 strapping mortar with a thickness of 3 mm will be about 5 to 6 kg per square meter. This value changes depending on the type of work surface, surface porosity and how the grooves are on the back of the tile.

Bonding mortar VTH3010 is in two parts. Always mix the two packages thoroughly. Then slowly add component B to component A and mix together. Continue mixing for three minutes.
Apply the prepared mortar with a trowel or grooved trowel up to a maximum thickness of 5 mm in each step. To reach a thickness of more than 5 millimeters, the execution steps must be done layer by layer until the desired thickness is reached. To apply on the prepared surface in a thin layer, use a slotted trowel to place the mortar on the application surface and put the tile on it with a little pressure.

• The storage period is one year in the original packaging.
• The best storage temperature is +10 to +30 degrees Celsius.
• packing : A total of 10 kg Part A: 7 kg and part B: 3 kg

This substance is not in the range of harmful substances for the environment, and if it comes into contact with the eyes, you should see a doctor immediately. Masks, gloves and appropriate safety equipment must be used. This substance is flammable. It should be kept away from heat and direct flame.

• physical state : Dough
• Color : Part A: White and component B: Black
• Special Weight : g/cm 0/05 ± 1/88
• Composition ratio: A : 3 and part B: 2/3